上海扬诺锅炉制造有限公司

主营:上海电蒸汽锅炉生产,上海电热水锅炉厂家,上海高温高压蒸汽清洗机

免费店铺在线升级

联系方式

反应釜配套蒸汽发生器,蒸汽锅炉,电加热

2020-08-12 04:03:01  1121次浏览 次浏览
价 格:16600

3-50KW免检电蒸汽发生器

(中文)

技术特点

1、 免办锅炉使用证的独特内部结构设计

该系列产品水容积小于30L,在国家的免办锅炉使用证范围内,即无须办理锅炉使用证。炉胆装有内置式汽水分离器,解决了蒸汽带水的难题,更加保证了蒸汽的优质性。

2、 采用液晶显示全自动智能电控系统

锅炉操作系统为全自动控制,所有的运行状态均可在液晶屏中一目了然。您可以在显示屏中观察到锅炉电加热管工作状态,锅炉水位状态,蒸汽压力高低状态,水泵运行状态,故障报警状态等,让您随时掌握锅炉运行状况,使用更放心。

3、 采用优质核心部件—电加热管

电加热管不仅采用优质厚壁316L不锈钢管制作,使用寿命超过常用的304不锈钢管30%,而且采用进口高温氧化镁粉及封口材料,耐高温可达900℃。更好的确保了电加热管的使用寿命。另外,电热管与炉体与法兰连接,利于更换、维修和保养。

4、 采用优质零部件

所有的管路和仪器仪表连接均采用不锈钢管或铜管连接,电器采用国内知名德力西电器,使用可靠,配置豪华。

5、 多重连锁保护功能。

产品装有经锅炉检验所校验的阀、压力控制器等超压保护,防止锅炉因压力过大而造成爆炸事故;同时具有极限低水位保护,在供水停止的情况下锅炉将自动停止工作,防止了锅炉干烧导致电加热元件损害甚至烧坏的现象。漏电保护器让操作人员和设备的更有保障,即使在锅炉操作不当引起的电路短路、漏电的情况下锅炉也将会自动切断电路,及时的保护好操作人员和控制线路。

6、 极易安装,使用方便

产品出厂前均通过严格的调试,用户只需要将电源和水源接好,按下启动键锅炉即可进入全自动运行状态,无需繁杂的安装。

7、 科学设计,精美外观

采用柜式的科学设计风格,内部设计结构合理,维修保养极其方便。锅炉外壳采用数控切割和数控折边一次成型工艺,做工精细;外壳表面经过高温喷塑处理,经久耐用,外表美观大方,。

8、 利用电能更环保更节约

电能绝无污染,相对其他燃料更环保,利用低谷电更可大大地节约设备的运行成本,是节能环保的选择。

产品参数

(3-24KW参数)

型号

规格

YN6-

0.7-D YN9-

0.7-D YN12-

0.7-D YN18-

0.7-D YN24-

0.7-D YN27-

0.7-D YN30-

0.7-D

额定电功率(KW) 6 9 12 18 24 27 30

额定蒸发量(Kg/h) 8.6 12.9 17.2 25.8 34.4 38.7 43

电源电压(V) 220/380 220/380 380 380 380 380 380

额定工作压力(MPa) 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0

饱和蒸汽温度(℃) 170/185 170/185 170/185 170/185 170/185 170/185 170/185

电源线截面积(mm2) 10/4 6/4 6 10 10 10 10

外形尺寸(mm) L*W*H 640x380x960 L*W*H 650x420x1200

蒸汽管口径(mm) DN15 DN15 DN15 DN15 DN15 DN15 DN15

排污管口径(mm) DN15 DN15 DN15 DN15 DN15 DN15 DN15

进水管口径(mm) DN15 DN15 DN15 DN15 DN15 DN15 DN15

产品重量(kg) 85 85 95 120 120 120 130

(36-50KW参数)

型号

规格

LDR0.051-0.7 LDR0.064-0.7 LDR0.07-0.7

额定电功率(KW) 36 45 50

额定蒸发量(Kg/h) 51 64 70

电源电压(V) 380 380 380

额定工作压力(MPa) 0.7 0.7 0.7

饱和蒸汽温度(℃) 170 170 170

电源线截面积(mm2) 16 16 25

外形尺寸(mm) L*W*H 820x600x1250

蒸汽管口径(mm) DN20 DN20 DN20

排污管口径(mm) DN20 DN20 DN20

进水管口径(mm) DN15 DN15 DN15

产品重量(kg) 230 230 250

(参数如有变动,恕不另行通知)

制造依据

1. 锅炉的制造符合《蒸汽锅炉技术监察规程》;JB/T10094-2002《工程锅炉通用技术条件》;JB/T10393-2002《电加热锅炉技术条件》。

2. 锅炉水质符合GB1576-2001《工业锅炉水质》。

3. 锅炉安装符合GB50273-98《工业锅炉安装工程施工及验收规范》。

4. 部件水压实验应符合JB/T1612《锅炉水压实验技术条件》的规定,水压试验压力为1.05MPa。

3-50KW免检电蒸汽发生器

(英文)

技术特点 characteristics

1. Exemption for boiler of the internal structure of card unique design

This series of products water volume is less than 30 L, in the country of the exemption for the boiler within the scope of card, need not use card is dealt with the boiler. Furnace equipped with built-in water separator, bravery, solve the vapor carry liquid problem, ensure the high quality of steam more sex.

2. And the use of liquid crystal display automatic intelligent control system

The boiler control system for automatic control, all of the operation state, are available on the LCD panel be clear at a glance. You can display in observed in electric heating boiler tubes work state, boiler water level state, state high and low pressure steam, water pump operation state, fault alarm status, so you can master the boiler operation condition, use more at ease.

3. Use the high quality core components-electric heating pipes

Electric heating pipes adopts the high quality not only thick wall 316 L stainless steel control, service life more than the commonly used 304 stainless steel tube 30%, and USES the import high temperature magnesium oxide powder and sealing materials, high temperature resistant up to 900 ℃. Better ensure the service life of the electric heating pipes. In addition, electric heat pipe and furnace and flange connection, to replace, repair and maintenance.

4. Use the high quality components

All of the pipeline, and instrument connection all use stainless steel pipe or copper tube connection, the most famous delixi electric domestic appliances, the use of safe and reliable, configuration luxury.

5. Multiple chain security protection function

With the product inspection of boiler and pressure relief valve check controller etc overpressure protection, prevent boiler pressure caused by excessive explosion accident; At the same time a limit low water protection, in water supply under the condition of the boiler stop will be to stop working, and prevent the boiler burning electric heating element to do damage to burn out even the phenomenon. The leakage protector let operation safety of people and equipment are more security, even in the boiler operation undeserved cause a short circuit, leakage of boiler will cut off the circuit automatically, timely protect operators and control circuit.

6. Extremely easy installation and easy to use

Before the products leave the factory are through the strict test, the user need only to power and water connected and press the start button to enter fully automatic boiler operation state, need not multifarious installation.

7. Scientific design, elegant appearance

The cabinet of scientific design style, internal design reasonable structure, maintenance, and extremely convenient. The boiler shell adopts CNC cutting and CNC ruffled a molding process, fine workmanship, Shell surface after high temperature pensu processing, durable, appearance is beautiful and easy.

8. Using electric energy more environmental protection is more economical

Electricity is free of pollution, relative to other fuel more environmental protection, use the off-peak more dramatically the operation of equipment cost saving, energy saving and environmental protection is the best choice.

技术参数 parameters

(3-24KW parameter)

Type

Spec

YN6-

0.7-D YN9-

0.7-D YN12-

0.7-D YN18-

0.7-D YN24-

0.7-D YN27-

0.7-D YN30-

0.7-D

Electric power(KW) 6 9 12 18 24 27 30

Rated evaporation(Kg/h) 8.6 12.9 17.2 25.8 34.4 38.7 43

Source voltage(V) 220/380 220/380 380 380 380 380 380

Rated pressure(MPa) 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0 0.7/1.0

Steam temperature(℃) 170/185 170/185 170/185 170/185 170/185 170/185 170/185

Power wire(mm2) 10/4 6/4 6 10 10 10 10

Dimension(mm) L*W*H 640x380x960 L*W*H 650x420x1200

Steam caliber DN15 DN15 DN15 DN15 DN15 DN15 DN15

Drain outlet caliber DN15 DN15 DN15 DN15 DN15 DN15 DN15

Water inlet caliber DN15 DN15 DN15 DN15 DN15 DN15 DN15

Weight (Kg) 85 85 95 120 120 120 130

(36-50KW parameter)

Type

Spec

LDR0.051-0.7 LDR0.064-0.7 LDR0.07-0.7

Electric power(KW) 36 45 50

Rated evaporation(Kg/h) 51 64 70

Source voltage(V) 380 380 380

Rated pressure(MPa) 0.7 0.7 0.7

Steam temperature(℃) 170 170 170

Power wire(mm2) 16 16 25

Dimension(mm) L*W*H 820x600x1250

Steam caliber DN20 DN20 DN20

Drain outlet caliber DN20 DN20 DN20

Water inlet caliber DN15 DN15 DN15

Weight (Kg) 230 230 250

(No separate notice will be made for any changes of the parameters)

制造规范 standard

1. Boiler manufactured is up to the "Technical Supervision Regulation for Safety of Steam Boilers "; JB/T10094-2002 "Project Boiler Universal Technical Conditions"; JB/T10393-2002 "Electric Heating Boiler Technology Conditions."

2. Boiler water quality is up to GB1576-2001 "Industrial Boiler Water Quality."

3. Boiler installation is up to GB50273-98 "Industrial Boiler Installation Project Construction and Acceptance Specification."

4. Testing of part Water Pressure should be up to experimental JB/T1612 " Technical Condition for Testing of Boiler Water Pressure ", hydrostatic test pressure of 1.05 MPa.

网友评论
0条评论 0人参与
最新评论
  • 暂无评论,沙发等着你!
百业店铺 更多 >

特别提醒:本页面所展现的公司、产品及其它相关信息,均由用户自行发布。
购买相关产品时务必先行确认商家资质、产品质量以及比较产品价格,慎重作出个人的独立判断,谨防欺诈行为。

回到顶部